Our Products

Hydraulic Shearing

Kishan Hydraulic Shearing Machine are designed and developed through years of experience in sheet metal working machines. Kishan Hydraulic Shearing Machine are widely accepted in industries for continuous production runs and in areas requiring accuracy and respectability coupled with high production.

Yes, I am Interested !

Hydraulic Press Brake

STANDARD FEATURES FOR BASIC MODEL

Ram travel repeatable within +0.03mm or -0.03mm for consistent bends for interchangeable output. Ram travel is referenced from bed to avoid side frame deflection affecting stroke accuracy.

Rugged structure from ultra tested IS 2062 plates, rigidity conforming to international standards. Hydraulic, electricals of internationally reputed brands for consistent performance and relable operation. Front operated manually back gauge front sheet supports with scale. Most hydraulic parts rated for 310 bar but working pressure only 160bar for long life, reliable operation.

Ram guides of 4-piece designwith replaceable liners. Pivots with permanently lubricated by central hand pump. Cylinders of ultra-tested seamless honed tubes, hard chrome-plated pistons, dual seals (Teflon ring plus set of chevron packings) for extra reliability. 3-speed bending cycles for faster output yet slow smooth bending with minimal shock loads. Movable control station with majority controls, emergency stop, up-down foot-switch controls, inch cycle mode for set-up and one-off jobs. Single cycle modes for repeat cycles, production runs.

Main cylinders seals can be easily replaced without requiring crane of dismantling the ram. Hydraulic power gives silent working, better safety againts overload, instant stoppage-reversal of ram One set of unhanded standard punch, multi-V die Block Lifting chains system and rotation of die block when using multi-vee die block.

Yes, I am Interested !

Hydraulic Deep Draw Press

 Kishan Hydraulic Deep Draw Press are designed and developed through years of experience in sheet metal working machines. Kishan Hydraulic Deep Draw Press are widely accepted in industries for continuous production runs and in areas requiring accuracy and respectability coupled with high production.

  • Five cylinders double action deep draw press with mechanical eject system.
  • Two cylinders single action pin type deep draw press.

Uses & Application :- Electric motor fan cover, Every tyoe of penal boxes, special type of furniture and tube light boxes, Kitchen ware products, S.S. Kitchen sinks, S.S. washbasin, pressure cooker, etc.

Frame :- Column and Bottom are Fabricated from heavy mild steelwith facing and machining.

Cylinder :- Hydraulic cylinders are made out from seamless pipe with accurate boring, grinding, honing and piston from special rigid steel with same accuracy with U-cupe / chevron packing, and rubber O-Ring, etc.

Power pack :- Required power pack is provided with Gear pump, Vane pump, Plunger pump, Control valve, Connecting hoses pipes, Pressure meter, etc.

System of operating :- Hydraulic deep draw press is available in Hand Lever Direction Control valve and Automatic Electric penal with push button operating.

Yes, I am Interested !

Hydraulic 4 Roll Double Pinch Type

 Kishan plate machines are available in Six different ranges. All ranges of machine has a different mechanism, specifications and systems for suitable applications and production rate. Type K4RHH / K4RHM / K3RHH / K3RHM / K3RMM / K3RML.
Model K4RHH is very suitable for Medium and heavy plates or stainless steel. Model J4RHM is very suitable for light and medium plates. All other technical specification, standard and optional equipment is as under.

Technical Specification and Standard Accesories

  • Pipes in full circle or varying radiuses can be done easily.
  • Bottom roll and side rolls move with hydraulic cylinders.
  • Overload protection.
  • Top roll and bottom rolls are briven by hydraulic motor and planetary gearbox.
  • Hydraulic drop-end for easy removal of finished pipes.
  • Easy operation with mobile control panel.
  • Welded steel frames.
  • Forged or rolled steel rolls.
  • Manual central lubrication system.
  • Hydraulic and electrical balancing system.
  • Users manual.
Yes, I am Interested !

Under Crank Shearing Machine

 Kishan Brand Steel Body Geared and Ungeared Power operated Shearing Machine are designed for parallel sheet cutting. The machine is applicable to M.S., S.S., Copper, Brass, Aluminium, CRC, CRNGO, P.S.B., etc. cutting industries. It is also applicable to manufacturers of Electric stamping, Automobiles, Tin Drum Barrel, Control panels and Boards, Steel Furniture, Tube light Patties, Fabricators and Kitchenware items, etc.

Side Frames :- Are of Steel Plates designed for maximum rigidity to eliminate deflection and to with stand continuous high speed performance at full capacity.

RAM (Upper Beam) :- Is of solid steel plate and additional ribs on back side the ram adds to its strength, carrying the upper knife. Its maximum weight ensure lesser load on the bearing. The ram moves in accurate machined guide-ways, to avoid deflection for smooth running and maintains the proper strength of the upper knife.

Table :- Is of closed box type steel fabricated, which forms a rigid backbone for the shear and a solid backing for the lower knife. Additional ribs, under the table adds to its strength.

Blade :- Is four edged HC HCR provided for longer tool life.

Crank Shaft and Flywheel Shaft :- Is of best steel, accurately machined and runs in gun metal bearing and all other installed in gun metal bearings.

Hold Down :- Is of steel fabricated spring loaded ensure uniform pressure through out the cutting length without any slipping irrespective to the sheet.

Rolling Key Clutch :- Made of EN-24 steel for positive engagements and continuous operation having three key way. Single rolling key system is incorporated in the machine ensuring easy and efficient working of the machine.

Drive :- Is through "B" Belts on the fly wheel and other chain of job cut gears for smooth running and longer life.

Brake :- Constant spring loaded adjustable brake is provided.

Back Guage :- In KSML 5-7 and KSMH 4-7 are screw drive where as in KSUG 1-4 and KSMH 1-3 are of rack pinion type designed to accuracy and easily.

Lubrication :- For sufficient lubrication oil cups and oil points are provided.

Yes, I am Interested !

Mechanical / Pneumatic Press Brake

 Kishan Press Brakes and designed and developed through years of experience in Sheet Metal working machines. Kishan Press Brakes are widely accepted in industries for continuous production runs and in areas requiring repeatability coupled with high production.

Frames :- Frame is of robust steel construction of rigid and interlocked design. It is strain-free and supports the Ram and Bed against undesired deflection under permissible load condition.

RAM And BED :- Made from Steel Plates of suitable thickness. Machines for strainghtness and parallelism of the working surface. Ram is guided and supported throughout the stroke by accurately machines guideways.

Drive System :- Power is transmitted to the Ram through two individual Gear drives for uniform load distribution throughout the length. This also reduces the torsional streeses on the eccentric shaft electric motor used is of sufficient H.P. Which reduces slowdown of flywheel and increases energy available per stroke. The Gear and pinion are made out of carbon/alloy steel.

RAM Adjustment :- Motorised Ram adjustment through a simple drive mechanism facilitates quick bending angle adjustment is made simple by incorporating a spring loaded dog clutch.

Clutch and Brake :- All series of Press are provided with high torque how-inertia Friction Clutch, Synchronised with heavy duty mechanical Brake ensuring immediate braking of Ram on releasing the pedal. Clutch operating levers are designed in such a way that minimum, engaging force is reuired of the pedal.

Standard Accessories :- Foot pedal and Die Block Lifting Link, Fly Wheel and Gear Guard, Self Lubrication System, Motor Pully, Standard "V" Block and Punch, Motor Mounting Bracket.

Yes, I am Interested !

Heavy Duty Hydraulic Press

 Kishan Heavy Duty Hydraulic Press are designed and developed through years of experience in sheet metal working machines. Kishan Heavy Duty Hydraulic Press are widely accepted in industries for continuous production runs and in areas requiring accuracy and respectability coupled with high production.

Yes, I am Interested !

Power Press

 Kishan Power Press are designed and developed through years of experience in sheet metal working machines. Kishan Power Press are widely accepted in industries for continuous production runs and in areas requiring accuracy and respectability coupled with high production.

Yes, I am Interested !

Our Products

Quick Enquiry

Get In Touch