Our Products

Asphalt Drum Mix Plant

Caption 1


Technical Specifications

Caption 1

Yes, I am Interested !

Wet Mix Macadam Plant

FEATURES

  • Modern Wet Mix Macadam Technology.
  • Produces High Quality Mix.
  • Portable or Stationary.
  • High Production Rate.
  • Highly Accurate Aggregate & Additives Feeder.
  • Easy to Operate.

4-BIN FEEDER

It is of single chassis construction. At each Bin a radial gate is provided which can be opened in any position to regulate the aggregate flow. Individual endless belts are provided, below the gates to discharge material onto the gathering belt.

VIBRATING SCREEN

A single-deck vibrating screen is provided on the slinger conveyor to remove oversize aggregates received from the 4-bin feeder.

SLINGER CONVEYOR

An inclined conveyor with 600 mm wide belt mounted on idlers receives aggregate from the gathering conveyor and feeds it to the pug mill.
PUG MILL

A twin shaft pug mill mounted on antifriction bearing provides quick, continuous and homogeneous mix of aggregates and additives.

WATER TANK

One / Two Water Tanks of 15 / 20 MT capacity each are provided, fabricated from steel plates with manhole, flowmeter, pump etc.

MINERAL FILLER

Fabricated from steel, it feeds the required quantity of additives to the pug mill.

CONTROL CABIN

A fully automatic Control Panel is provided for controlling the quantity and quality of production with operator sitting in Air-conditioned comfort.

OPTIONAL

Variable Feeding Device can be provided for Belt Feeder. Wet Mix Storage Silo.

Yes, I am Interested !

Asphalt Mobile Drum Mix Plants

 The Sweeper is constructed from pressed steel shell which give excellent strength to weight ratio. It is a tractor mount sweeper driven from the tractor PTO shaft and is available with small debris collector box and water spray equipment as optional. The sweeper is designed for use with almost any tractor which is fitted with hydraulic lift, three point linkage and power take off and can be fitted or detached in less than five minutes.

Brush sections are supplied in crimped steel wire or polyproplyene and are easily replaceable. The castor wheels fitted to the rear enables the sweeper to follow road undulations. The sweeper may be used to sweep straight ahead (for collection) or in two angled positions either side. The splash guard fitted to the sweeper is easily removed the allow the collector attachment to be bolted into place.

FEATURES

  • Steel wire, polypropylene or combination brush section.
  • Rigid pressed steel shell.
  • Easily adjusted for brush wear.
  • Different lengths available to special order
  • Optional water tank and sprinkler attachment.
Yes, I am Interested !

Bitumen Pressure Distributor

 Driving Unit

Powered by a 25 HP Air cooled, Kirloskar make diesel engine.
Bitumen Spraying Pressure

0 - 6 kg/cm2, Pressurized bitumen spraying.
Temperature Indicators

0 - 300°C (analog) scale located on the tank. Digital temperature indicator on remote box.
Spray Bar

Standard width : 2.4 M. Adjustable extension bar for spraying width upto 4.2 M.
Nozzle distance : 225 mm Nozzle c/c. Pneumatically operated nozzles for Spray bar controlling.

Technical Specifications

Caption 1

Yes, I am Interested !

Mini Bitumen Sprayer

FEATURES

  • An attachment on Truck, tractor & Jeep.
  • Chassis and linkage holder are entirely made of steel.
  • Both Heating System, Wood Fire Bhatthi & Burner System.
  • 2.5 Ton Capacity.
  • Heavy Duty Chassis & Structure.
  • Safe & easy Operation.
  • Hand Spray System.

Technical Specification

Caption 1

Yes, I am Interested !

Hydraulic Broomer

The Sweeper is constructed from pressed steel shell which give excellent strength to weight ratio. It is a tractor mount sweeper driven from the tractor PTO shaft and is available with small debris collector box and water spray equipment as optional. The sweeper is designed for use with almost any tractor which is fitted with hydraulic lift, three point linkage and power take off and can be fitted or detached in less than five minutes.

Brush sections are supplied in crimped steel wire or polyproplyene and are easily replaceable. The castor wheels fitted to the rear enables the sweeper to follow road undulations. The sweeper may be used to sweep straight ahead (for collection) or in two angled positions either side. The splash guard fitted to the sweeper is easily removed the allow the collector attachment to be bolted into place.

FEATURES

  • Steel wire, polypropylene or combination brush section.
  • Rigid pressed steel shell.
  • Easily adjusted for brush wear.
  • Different lengths available to special order
  • Optional water tank and sprinkler attachment.

Technical specifications

Caption 1

Yes, I am Interested !

Mechanical Broomer

Drum Melting Plant

Our Products

Quick Enquiry

Get In Touch