Our Products

Power Press

RT Power Press are designed and developed through years of experience in sheet metal working machines. RT Power Press are widely accepted in industries for continuous production runs, and in areas requiring accuracy and repeatability coupled with high production.

 

Specifications:

Capacity Dist. Between Dist. Betweem Travel of  Travel of ram moter
in ton column in mm Ram ti Bed Hand oprated Power oprated H.P.
5 ton 625 x 200 150 x 550 100 125 0.5
15 ton 800 x 225 150 x 750 120 175 1
25 ton 850 x 300 175 x 850 125 175 1.5
40 ton 1000 x 400 175 x 1000 150 200 2
60 ton 1050 x 450 175 x 1050 150 200 3
75 ton 1200 x 450 180 x 1200 180 225 3
100 ton 1275 x 525 180 x 1275 200 250 5
150 ton 1375 x 625 200 x 1425 200 250 7.5
200 ton 1450 x 730 200 x 1500 200 300 10
Yes, I am Interested !

Roll Plate Bending Machine

Specifications:

The Pinch Cum Puramid Principle

  • The machine based on this principle combine the advantages of three roll pyramid type, three roll initial pinch type and four roll
  • pinch type machines.
  • Highest degree of pre-bending can be achieved and only the smallest possible width of flat remains.
  • An error in pre pinching can be corrected even after the shell is completed.
  • It can pre-pinch and roll the plate without removing the plate from machine after first insertion.
  • Inclined movement of bottom rolls provides wider bending span as the plate thickness increases, and better grip in thinner plates.

Cone Bending 

  • The Machine has inherent feature for conical bending without any extra attachments. The two bottom rolls are inclined by disengaging the dog clutch by lever fitted on the machine. Even pre-pinching of cones can be done.

Salient Features 

  • Top roll drive for rolling thin plates.
  • Highest degree of pre-bending can be achieved and only the smallest possible width of flat remains.
  • Plate Squaring(aligning) arrangement.
  • Small dia. Top roll for small shell rolling (for reduced capacity).
Yes, I am Interested !

Hydraulic Shearing Machine

Standard Features: 

  • Moving beam synchronized by differential cylinders.
  • Hardened rollers guide beam for constant blade gap.
  • Rank angle adjustable to suit thickness and material.
  • Blade gap adjustable with levers for clean cuts.
  • Sheets clamped hydraulically before cut starts.
  • Shearing-clampin forces adjustable to suit job.
  • Both blades premium HCHCr, four usable edges.
  • Cutting length and position adjustable for shorter job.
  • Beam returns on releasing foot switch for smaller cuts.
  • Cutting area illuminated for clear view of blades.
  • first two hold-downs spaced closer at both ends.
  • Squaring arm 1000mm at left with hardened lines.
  • Squaring arm 600mm at right helps distribute wear.
  • Front gauging with stops, scale on squaring arm.
  • Hardened rods, recessed table for easy sheet feeding.
  • Sheet supports 1000mm long help support long plates.
  • Ramp on rear slides out cut sheets outside shear area.
  • Back gauge moves away trapping of cut sheets.
  • Foot switch movable for operation from safe position.
  • Finger Safety guard with clear view of lighted cutting area.
  • Dependable global of hydraulics, electrical.
  • Efficient compact power pack with minimal piping.
  • Electrical neatly wired-labelled for trouble shooting.

Optional Accessories: 

  • Sheet front feeding system.
  • NC back gauge with ball screw.
  • Hydraulic rear sheet support.
  • Automatic control shearing.
  • Sheet rear stacking system.

Specifications:

Model

Shearing Length mm

Shear Thic. Rake Angle/(Min/Max)

Rake Angle

Rake Angle Range

Strokes/minute at Min & Max Rake Angle

Holddowns

Holding Force Kgs.

Power H.P.

Ovar all Diamensions in mm
( L x W x H )

Approx. Weight Kgs.

M.S.

S.S.

RHV325

2500

3.15/4

2/3

1°15'

0.5-2°

28-13

13

2500

5

3150 x 2000 x 2400

3800

RHV330

3000

3.15/4

2/3

1°15'

0.5-2°

24-9

16

2500

5

3500 x 2000 x 2400

440

RHV412

1250

4/6

3/4

1°37'

0.5-3°

33-17

5

4000

5

2000 x 2000 x 2400

2700

RHV415

1500

4/6

3/4

1°37'

0.5-3°

30-15

8

4500

5

2250 x 2000 x 2400

3200

RHV420

2000

4/6

3/4

1°37'

0.5-3°

28-13

11

6200

7.5

2750 x 2000 x 2400

3500

RHV425

2500

4/6

3/4

1°37'

0.5-3°

26-8

13

8000

7.5

3400 x 2350 x 2450

5200

RHV430

3000

4/6

3/4

1°37'

0.5-3°

24-6

16

10000

10

4000 x 2350 x 2450

6000

RHV440

4000

4/6

3/4

1°45'

0.5-3°

22-6

20

12000

10

4500 x 2350 x 2450

85000

RHV615

1500

6/8

4/6

1°45'

0.5-3°

24-8

9

6600

10

2250 x 2350 x 2500

4000

RHV620

2000

6/8

4/6

1°45'

0.5-3°

22-7

11

6500

10

2750 x 2350 x 2500

4300

RHV625

2500

6/8

4/6

1°45'

0.5-3°

28-8

14

8500

15

3400 x 2350 x 2500

6200

RHV630

3000

6/8

4/6

1°45'

0.5-3°

24-6

16

10800

15

4000 x 2350 x 2500

7000

RHV640

4000

6/8

4/6

0.5-3°

24-6

20

13600

20

5100 x 2700 x 2800

8400

RHV815

1500

8/10

6/8

0.5-3°

22-10

9

10500

15

2250 x 2600 x 2650

5000

RHV820

2000

8/10

6/8

0.5-3°

18-8

11

12500

15

2750 x 2600 x 2650

5500

RHV825

2500

8/10

6/8

0.5-3°

24-8

14

16300

20

3500 x 2600 x 2650

6800

RHV830

3000

8/10

6/8

0.5-3°

20-6

16

18500

20

4200 x 2600 x 2650

7700

RHV840

4000

8/10

6/8

0.5-3°

20-8

20

23000

25

5200 x 2900 x 2800

13500

RHV1015

1500

10/13

8/10

0.5-3°

20-10

9

10500

15

2250 x 2650 x 2700

5500

RHV1020

2000

10/13

8/10

0.5-3°

18-8

11

12600

15

2750 x 2650 x 2700

6000

RHV1025

2500

10/13

8/10

0.5-3°

24-8

14

17500

20

3600 x 2650 x 2700

8000

RHV1030

3000

10/13

8/10

0.5-3°

20-6

16

20000

20

4200 x 2650 x 2700

10500

RHV1040

4000

10/13

8/10

0.5-3°

18-6

20

25000

30

5200 x 2900 x 2900

15200

RHV1320

2000

13/16

10/13

1-3°

13-5

11

16500

20

2750 x 2650 x 2950

7000

RHV1325

2500

13/16

10/13

1-3°

15-10

13

32000

25

3600 x 2650 x 2950

9600

RHV1330

3000

13/16

10/13

1-3°

12-6

16

37000

25

4200 x 2650 x 2950

11800

RHV1340

4000

13/16

10/13

1-3°

10-4

20

22000

30

5200 x 3000 x 3050

17800

RHV1620

2000

16/20

13/16

1-3°

13-7

11

20000

25

2750 x 2950 x 3150

12000

RHV1625

2500

16/20

13/16

1-3°

15-8

13

40000

30

3600 x 2950 x 3150

12000

RHV1630

3000

16/20

13/16

1-3°

12-6

16

43500

30

4250 x 2950 x 3150

15300

RHV1640

4000

16/20

13/16

1-3°

10-4

20

30000

30

5200 x 3050 x 3500

21500

RHV2020

2000

20/25

16/20

1-3°

16-8

11

32000

40

2900 x 2950 x 3150

17000

RHV2025

2500

20/25

16/20

1-3°

15-8

13

48000

40

3600 x 2950 x 3150

18000

RHV2030

3000

20/25

16/20

1-3°

12-6

16

52000

40

4250 x 2950 x 3150

20000

RHV2040

4000

20/25

16/20

1-3°

10-4

20

30000

50

5200 x 3050 x 3500

24000

Yes, I am Interested !

Hydraulic Press Brake

RT Power Press Hydraulic Press Brakes are designed and developed through years of experience in sheet metal working machinaries. RT Power Press Hydraulic Press Brakes are developed by keeping latest technology in mind. Both cylinders are mounted at back side of Press Brake are synchronized for parallesm between ram & table, by providing mechanical links connected with cylinder. The heavy duty steel construction frame is so designed to absorb heavy shocks of overload. All welding edges are properly machined for best weld joints. The electric control panel is fixed on side wall at conventional place for easy reach of operator. It includes push botton pendant and foot switch. Standard “V” block & “V” Punch and manually operated back guage system which is front operated are supplied as a standard accessories. Hydraulic components are of reputed make like Videkers, Rexroth, Dowty, Yuken, Polyhydron etc.

Specifications:

Model

Tonnage

Bending Cap.(In M.S., UTS 45Kg/mm2)

Table Length

Table Width

Clear Pass

Ram Stroke

Open Height

Throat Depth

Speed Approch Pressing Return

Power H.P.

Over all Diamensions
(L x W x H)

Approx. Weight Kgs.

RHP215

20

1.6 x 1500

2 x 1250

1500

125

1250

100

250

100

35-9-35

2

1800 x 1500 x 2000

1500

RHP320

30

2 x 2000

3 x 1250

2000

125

1700

100

280

200

30-7-30

3

2300 x 1600 x 2000

2500

RHP425

40

2 x 2500

3 x 1500

2500

170

2000

100

280

200

40-8-40

3

2700 x 1850 x 2050

3000

RHP515

50

4 x 1500

5 x 1250

1500

170

1000

100

280

200

35-7-35

5

1800 x 1500 x 2000

2500

RHP520

50

3 x 2000

4 x 1500

2000

170

1500

100

280

200

35-7-35

5

2300 x 1900 x 2200

3400

RHP525

50

2.5 x 2500

3 x 2000

2500

170

2000

100

280

200

35-7-35

5

2850 x 1900 x 2200

3700

RHP625

65

3 x 2500

4 x 2000

2500

170

2000

150

330

200

30-5-30

5

2850 x 1950 x 2350

3900

RHP630

65

2.5 x 3000

3 x 2500

3000

170

2500

150

330

200

30-5-30

5

3350 x 1950 x 2350

4300

RHP825

80

4 x 2500

5 x 2000

2500

170

2000

150

350

200

38-6-45

7.5

2850 x 2100 x 2350

4500

RHP830

80

3 x 3000

4 x 2500

3000

170

2500

150

350

200

38-6-45

7.5

3350 x 2100 x 2350

5000

RHP1025

100

5 x 2500

6 x 2000

2500

170

2000

150

350

200

38-6-45

7.5

2900 x 2200 x 2350

5600

RHP1030

100

4 x 3000

5 x 2500

3000

170

2500

150

350

200

38-6-45

7.5

3400 x 2200 x 2350

6200

RHP1040

100

3 x 4000

4 x 3000

4000

170

3000

150

350

200

38-6-45

7.5

4250 x 2200 x 2350

7000

RHP1225

125

6 x 2500

8 x 2000

2500

220

2000

150

350

300

38-5-40

10

2750 x 2450 x 2600

6500

RHP1230

125

5 x 3000

6 x 2500

3000

220

2500

150

350

300

38-5-40

10

3400 x 2450 x 2600

7000

RHP1240

125

4 x 4000

5 x 3000

4000

220

3000

150

350

300

38-5-40

10

4150 x 2450 x 2650

8800

RHP1625

160

8 x 2500

10 x 2000

2500

220

2000

150

350

300

35-6-40

15

2750 x 2500 x 2600

8200

RHP1630

160

6 x 3000

8 x 2500

3000

220

2500

150

350

300

35-6-40

15

3400 x 2500 x 2600

8800

RHP1640

160

5 x 4000

6 x 3000

4000

220

3000

150

350

300

35-6-40

15

4200 x 2500 x 2700

9800

RHP2025

200

10 x 2500

12 x 2000

2500

220

2000

200

410

300

35-7-35

20

2850 x 2650 x 2700

8500

RHP2030

200

8 x 3000

10 x 2500

3000

220

2500

200

410

300

35-7-35

20

3450 x 2650 x 2700

9500

RHP2040

200

6 x 4000

8 x 3000

4000

220

3000

200

410

300

35-7-35

20

4200 x 2650 x 2800

10500

RHP2530

250

10 x 3000

12 x 2500

3000

300

2500

200

410

300

35-6-40

25

3350 x 2650 x 2800

12000

RHP2540

250

8 x 4000

10 x 3000

4000

300

3000

200

410

300

35-6-40

25

4350 x 2650 x 2800

13500

RHP3030

300

12 x 3000

15 x 2500

3000

300

2500

200

410

300

30-6-35

30

3450 x 2750 x 2800

12000

RHP3040

300

10 x 4000

12 x 3000

4000

300

3000

200

410

300

30-6-35

30

4250 x 2750 x 2900

15000

RHP4030

400

16 x 3000

20 x 2500

3000

300

2500

250

500

300

30-5-35

40

3350 x 2900 x 3000

17000

RHP4040

400

12 x 4000

16 x 3000

4000

300

3000

250

500

300

30-5-35

40

4300 x 2900 x 3000

18000

Yes, I am Interested !

Under Crank Shearing Machine

RT Power Press Shearing Machines have been designed and developed through structural analysis for continuous production, accuracy and repeatability.

   

Frame:

Rigid steel frame of Shubham Shears are optimally designed to avoid weak sections at load supports and is of interlocked design. The ram is guided throughout its length by accurate machined guide ways ensuring proper clearance and clean cut.

   

Hold – Down System:

Spring loaded mechanical hold down pads hold the sheet security, to avoid slipping and bowing resulting in clean square cuts. Hold down units are provided with oversize pads to avoid impressions on sheet metal on request.

   

Knives:

Shubham Shears are provided with high quality single segment (HcHcr) Knives for longer tool life. Ease in assembling of knife reduces down-time. The knife blades are four edged.

   

Lubrication:

All bearing parts and guide surfaces are lubricated through hand-operated lubrication system.

   

Mechanical Back Guage:

This is a standard equipment provided on all Shubham Shears. Scale on the back guage gives instantaneous reading of distance between shear and back guage. Thus avoiding errors and maintenance encountered in electronic equipment.

   

Finger Guard:

Fitted in front of hold-down for operator protection without obstructing viewing.

Standard Features: 

  • Foot Pedal.
  • Fly Wheel & Gear Guard.
  • Self Lubrication System
  • Motor Pully
  • A Pair of Four Edge Sher Blade
  • Standard Front Guage
  • Back Guage (Manual Operated)

Options: 

  • Motorised Back Guage.
  • Automatic Lubrication System.
  • Vee-Belts.
  • Electric Motor & Starter / Control Panal Board.
  • Squaring Guage System.
  • Stroke Counter.
  • Extension Squaring Arm.
  • Hydraulic Holddown Pads (Cam-Pump).
  • All Dimensions are in mm.
  • Power Supply 400/440 volts, 3 Phase, 50 Cycle.
  • As day to day improvements are contemplated for better performance of the machine. We reserve the rights to alter the specifications without prior notice.
  • All the machines undergo a through check-up by our expert engineers before dispatch to ensure their smooth and trouble free operation.

Specifications:

Model

Cutting Cap. In M.S.
(Length*Thick)

Depth of Throat

Standard Front guage

Standard Rear guage

Table
(Height/Width)

Blade
(L x W x T)

Stroke Per Minute

Hold Down to Knife Edge

Machine
( L x W x H )

Main motor
HP / KW

Approx. Weight Kgs.

RUC212

1270 x 2

80

600

750

850/425

1270 x 50 x 12

60

20

2200 x 1950 x 1400

2/1.5

1800

RUC215

1525 x 2

80

600

750

850/425

1525 x 50 x 12

60

20

2450 x 1950 x 1400

3/2.2

2050

RUC220

2030 x 2

80

600

750

850/425

2030 x 50 x 12

60

20

2950 x 1950 x 1400

5/3.7

2600

RUC225

2540 x 2

80

600

750

850/425

2540 x 50 x 12

50

20

3450 x 1950 x 1400

5/3.7

3350

RUC231

3125 x 2

80

600

750

850/425

3125 x 50 x 12

50

20

4150 x 1950 x 1400

7.5/5.6

4100

RUC412

1270 x 4

80

600

750

850/450

1270 x 63 x 14

50

25

2290 x 2000 x 1525

5/3.7

2500

RUC415

1525 x 4

80

600

750

850/450

1525 x 63 x 14

50

25

2540 x 2000 x 1525

5/3.7

2900

RUC420

2030 x 4

80

600

750

850/450

2030 x 63 x 14

50

25

3050 x 2000 x 1525

7.5/5.6

3300

RUC425

2540 x 4

80

600

750

850/450

2540 x 63 x 14

50

25

3550 x 2000 x 1525

7.5/5.6

4000

RUC431

3125 x 4

80

600

750

850/450

3125 x 63 x 14

50

25

4200 x 2000 x 1525

10/7.5

4750

Yes, I am Interested !

Over Crank Shearing Machine

RT Power Press Shearing Machines have been designed and developed through structural analysis technique for continuous production, accuracy and repeatability.

Over Crank Shearing Machine

RT Power Press Shearing Machines have been designed and developed through structural analysis technique for continuous production, accuracy and repeatability.

   

Frame:

Rigid steel frame of Shubham Shears are optimally designed to avoid weak sections at load supports and is of interlocked design. The ram is guided throughout its length by accurate machined guide ways ensuring proper clearance and clean cut.

   

Hold – Down System:

Spring loaded mechanical hold down pads hold the sheet securely, to avoid slipping and bowing resulting in clean square cuts. Hold down units are provided with oversize pads to avoid impressions on sheet metal on request.

   

Knives:

Shubham Shears are provided with high quality single segment (HcHcr) Knives for longer tool life. Ease in assembling of knife reduces down-time. The knife blades are four edged.

   

Lubrication:

All bearing parts and guide surfaces are lubricated through hand-operated lubrication system.

   

Mechanical Back Guage:

This is a standard equipment provided on all Shubham Shears. Scale on the back guage gives instantaneous reading of distance between shear and back guage. Thus avoiding errors and maintenance encountered in electronic equipment.

   

Finger Guard:

Fitted in front of hold-down for operator protection without obstructing viewing.

 

Standard Features:

 
  • Foot Pedal.
  • Fly Wheel & Gear Guard.
  • Self Lubrication System
  • Motor Pully
  • A Pair of Four Edge Sher Blade
  • Standard Front Guage
  • Back Guage (Manual Operated)
 

Options:

 
  • Motorised Back Guage.
  • Automatic Lubrication System.
  • Vee-Belts.
  • Electric Motor & Starter / Control Panal Board.
  • Squaring Guage System.
  • Stroke Counter.
  • Extension Squaring Arm.
  • Hydraulic Holddown Pads (Cam-Pump).
  • All Dimensions are in mm.
  • Power Supply 400/440 volts, 3 Phase, 50 Cycle.
  • As day to day improvements are contemplated for better performance of the machine. We reserve the rights to alter the specifications without prior notice.
  • All the machines undergo a through check-up by our expert engineers before dispatch to ensure their smooth and trouble free operation.
 

TOP

Specifications:

Model

Cutting Cap. In M.S.
(Length x Thick)

Depth of Throat

Standard Front guage

Standard Rear guage

Table
(Height/Width)

Blade
(L x W x T)

Stroke Per Minute

Hold Down to Knife Edge

Machine
(L x W x H)

Main motor
HP / KW

Approx. Weight Kgs.

ROC612

1270 x 6

80

600

750

770/450

1270 x 75 x 18

30

45

2250 x 1950 x 2300

7.5/5.6

4500

ROC615

1525 x 6

80

600

750

770/450

1525 x 75 x 18

30

45

2500 x 1950 x 2300

10/7.7

5100

ROC620

2030 x 6

80

600

750

770/450

2030 x 75 x 18

30

45

3000 x 1950 x 2300

10/7.7

6300

ROC625

2540 x 6

80

600

750

770/450

2540 x 75 x 18

30

50

3550 x 1950 x 2300

12/9.7

7200

ROC631

3125 x 6

80

600

750

770/450

3125 x 75 x 18

30

50

4150 x 1950 x 2400

15/11.2

9800

ROC815

1525 x 8

80

600

750

770/450

1525 x 75 x 18

30

50

2570 x 1950 x 2300

12.5/9.7

6500

ROC820

2030 x 8

80

600

750

800/450

2030 x 75 x 18

25

50

3150 x 1950 x 2500

12.5/9.7

7000

ROC825

2540 x 8

80

600

750

800/450

2540 x 75 x 18

25

50

3670 x 1950 x 2500

15/11.2

8000

ROC831

3125 x 8

80

600

750

800/450

3125 x 90 x 18

25

50

4250 x 1950 x 2600

20/15

11500

ROC1020

2030 x 10

80

600

750

800/450

2030 x 90 x 18

25

75

3200 x 1950 x 2600

15/11.2

7800

ROC1025

2540 x 10

80

600

750

800/450

2540 x 100 x 22

25

75

3700 x 1950 x 2600

20/15

9100

ROC1031

3125 x 10

80

600

750

800/450

3125 x 100 x 22

25

75

4300 x 1950 x 2600

25/18.7

9600

ROC1320

2030 x 13

80

600

750

800/450

2030 x 100 x 22

25

75

3250 x 1950 x 2600

20/15

9250

ROC1325

2540 x 13

80

600

750

800/450

2540 x 100 x 22

25

75

3750 x 1950 x 2600

25/18.7

10500

ROC1331

3125 x 13

80

600

750

800/450

3125 x 100 x 22

25

75

4350 x 1950 x 2600

30/22.5

13000

Yes, I am Interested !

Mechanical Press Brake

RT Power Press Brakes are designed and developed through years of experience in sheet metal working machines. RT Power Press Brakes are widely accepted in industries for continuous production runs, and in areas requiring accuracy and repeatability coupled with high production.

Frame:

Frame is of robust fabricated steel construction of rigid and interlocked design, It is strain- free and supports the ram and bed against undesired deflection under permissible loding condition.

   

Ram and Bed:

Made from steel Plates of suitable thickness, machined for straightness and parallelism of the working surfaces. Ram is guided and supported throughout the stroke by accurately machined guided ways.

   

Drive System:

Power is transmitted to the ram through two individual geardrives for uniform load distribution throughout the length. This also reduces the torsional stresses on the eccentric shaft. Electric motor used is of sufficient H.P. which reduces slowdown of flywheel and increases energy available per stroke. The gear and pinion are made out of carbon/alloy steel.

   

Ram Adjustment:

Motorised ram adjustment through a simple drive mechanism, facilitates quick bending angle adjustment. Angular ram adjustment is made simple by incorporating a spring loaded dog clutch.

   

Clutch and Brake:

All series of press brakes are provided with high-torque low-inertia friction clutch, synchronized with heavy duty mechanical brakes ensuring immediate braking of ram on releasing the pedal. Clutch operating levers are designed in such a way that minimum engaging force is required at the pedal.

Standard Features: 

  • Foot Pedal and Die Block Lifting Link.
  • Fly Wheel & Gear Guard.
  • Self Lubrication System.
  • Motor Pully.
  • Stroke counter.
  • Standard “V” Block and Punch.
  • Motor Mounting Bracket.

Options: 

  • Motorised Back Guage.
  • Automatic Lubrication System
  • ee-Belts.
  • Electric Motor & Starter / Control Panal Board.
  • Squaring Guage System.
  • Various type of Die & Punch.
  • Foundation Bolts.
  • All Dimensions are in mm.
  • Power Supply 400/440 volts, 3 Phase, 50 Cycle.
  • As day to day improvements are contemplated for better performance of the machine. We reserve the rights to alter the specifications without prior notice.
  • All the machines undergo a through check-up by our expert engineers before dispatch to ensure their smooth and trouble free operation.

Specifications:

Model

Capacity in Tons

Bending Cap.
(Length x Thick.)

Dist. Between Housing

Stroke Length

Stroke per Minute

Ram Adjustment

Shut Height Ram Stroke Down

Table Height

Depth of Throat

Main Motor H.P.

Ram Adjustment Motor H.P.

Die Space
(Length x Width)

Machine Dimensions
(L x W x H)

Approx. Weight Kgs.

RMP215

20

1525 x 1.6

990

50

30

40

200

760

240

3

Manual

1525 x 125

1800 x 1100 x 2300

2150

RMP220

25

2030 x 1.6

1220

50

30

40

200

760

240

5

1

2030 x 150

2300 x 1150 x 2300

2450

RMP620

65

2030 x 4

1220

75

30

75

220

800

300

7.5

1.5

2030 x 200

2300 x 1150 x 2300

3300

RMP825

80

2540 x 4

1700

75

30

75

220

800

300

10

1.5

2540 x 200

2900 x 1500 x 2850

5500

RMP1025

100

2540 x 5

1700

75

25

75

275

800

300

15

2

2540 x 254

2900 x 1800 x 3400

6900

RMP1031

100

3125 x 4

1700

75

25

75

275

800

300

15

2

3125 x 200

3400 x 1800 x 3400

7800

RMP1225

120

2540 x 6

1700

75

25

75

275

900

300

20

2

2540 x 254

2900 x 1800 x 3400

8300

RMP1231

125

3125 x 5

1700

75

25

75

275

900

300

20

2

3125 x 254

3400 x 1800 x 3400

8900

RMP1420

140

2030 x 8

1420

75

25

75

275

900

300

25

2

2030 x 254

2600 x 2160 x 3200

6500

RMP1531

150

3125 x 6

1900

75

25

75

275

900

300

25

2

3125 x 254

3400 x 1800 x 3400

9400

RMP2031

200

3125 x 8

1900

75

20

75

275

900

300

30

2

3125 x 254

3400 x 2000 x 3600

12500

Yes, I am Interested !

CNC 2D Wire Forming Machine

We specialize in manufacturing and supplying a qualitative range of Wire & Strip Forming Machines. The Wire & Strip Forming Machine ensures maximum production of wires and strips. These machines have a touch screen software to enhance productivity both in terms of quality and quantity. Our Wire & Strip Forming Machines are fully automatic and suitable for the production of all types of strips. These precisely designed and engineered machines save both power and energy and, therefore, highly demanded by clients across the nation. We offer this machine at a highly competitive price in the market.

Salient Features

  • Safety Detection for Material Disconnection & Jam
  • Continuous Feeding
  • Machine is fully automatic
  • Easy to load strip
  • Ideal for strip
  • Precise & Stable
  • Touch Screen Software
  • Automatic Lubrication
  • Fast production Rate
Yes, I am Interested !

c type power press

RT Power Press are designed and developed through years of experience in sheet metal working machines. RT Power Press are widely accepted in industries for continuous production runs, and in areas requiring accuracy and repeatability coupled with high production.

   

Frame:

The frame is made of heavy strength steel fabricated plate with suitable cross ribbing for quality & accuracy with precision performance.

   

Crank Shaft:

Crank Shaft is made of special alloy steel and fitted in with gun metal bushes for accurate alignment.

   

Clutch:

The clutch is of rolling key type & it is very rigid & better supported. The clutch gives continuous stroke for mass production.

   

Brake:

The Brake is powerful and works on top dead centre and compensated by spring.

   

Fly Wheel:

The Fly Wheel is made of high grade cast iron & it is balanced for storing & releasing adequate energy for the operations.

   

Gears:

Gears are of cast steel or fabricated. Gear teeth are generated by imported hobbing.

   

Lubrication:

Lubrication system is sufficient & accurate for lubricating in all bearing surfaces, sliding surfaces and moving parts without wasting of oil.

   

Table & Ram:

Table & Ram are made of heavy duty high graded cast iron with seasoned. Both are perfectly aligned to each other to obtain quality job.

Available Model: 

  • Available Model:
  • ‘C’ Frame Fixed type
  • ‘C’ Frame Inclinable type
  • ‘H’ Frame Piller type
  • Cross Shaft Press.

Options: 

  • Geared drive
  • Ungeared drive
  • Pneumatic drive
  • Stoke length change
  • Dist. Bed to Ram change
  • Dist. Centre to gap change
  • Knock out system
  • Auto lubrication system
  • All Dimensions are in mm.
  • Power supply 400/440 volts, 3 Phase, 50 Cycle. Geared Machine : 1440 RPM/Ungeared Machine : 960 RPM
  • As day to day Improvements are contemplated for better performance of the machine. We reserve the rights to alter the specifications
  • without prior notice.
  • All the machines undergo a through check-up by our expert engineers before dispatch to ensure their smooth and trouble free operation. & also available tailor made Power Press

Specifications:

Model No.

RPP 31

RPP 51

RPP 102

RPP 203

RPP 303

RPP 504

RPP 804

RPP 1005

RPP 1506

RPP 2006

RPP 2506

Tonnage Cap.

3

5

10

20

30

50

80

100

150

13-165

250

Stroke Adjustment

2 - 25

6 - 25

6 - 50

13 - 75

13 - 75

13 - 100

13 - 114

13 - 127

13 - 152

375

13 - 165

Depth of Throat

75

100

125

175

187

200

275

320

350

520

400

Dist Bed to Ram

130

150

200

280

300

350

450

450

500

520

550

Length & Width of Bed

200 x 150

350 x 200

450 x 250

500 x 350

550 x 375

650 x 400

750 x 550

900 x 640

1000 x 700

1050 x 750

1100 x 800

Hole in Bed

50

65

75

89

102

127

127

190

200

215

230

Hole in Ram

20

25

25

32

38

50

50

50

63

63

63

Crank Shaft Diameter

38

51

60

76

83

95

114

127

152

165

165

Fly wheel Diameter

330

356

406

508

560

762

762

813

915

1118

1170

Stroke per Minute

85

80

70

45

40

35

30

30

30

30

30

H P Required

0.5

0.5

1

2

3

5

7.5

10

15

20

25

Weight Approx

150

300

525

1000

1300

2300

4000

5400

6500

8500

11000

Yes, I am Interested !

Pneumatic Power Press Machine

RT Power Press are designed and developed through years of experience in sheet metal working machines. RT Power Press are widely accepted in industries for continuous production runs, and in areas requiring accuracy and repeatability coupled with high production.

   

Frame:

The frame is made of heavy strength steel fabricated plate with suitable cross ribbing for quality & accuracy with precision performance.

   

Crank Shaft:

Crank Shaft is made of special alloy steel and fitted in with gun metal bushes for accurate alignment.

   

Clutch:

The clutch is of rolling key type & it is very rigid & better supported. The clutch gives continuous stroke for mass production.

   

Brake:

The Brake is powerful and works on top dead centre and compensated by spring.

   

Fly Wheel:

The Fly Wheel is made of high grade cast iron & it is balanced for storing & releasing adequate energy for the operations.

   

Gears:

Gears are of cast steel or fabricated. Gear teeth are generated by imported hobbing.

   

Lubrication:

Lubrication system is sufficient & accurate for lubricating in all bearing surfaces, sliding surfaces and moving parts without wasting of oil.

   

Table & Ram:

Table & Ram are made of heavy duty high graded cast iron with seasoned. Both are perfectly aligned to each other to obtain quality job.

Available Model: 

  • Available Model:
  • ‘C’ Frame Fixed type
  • ‘C’ Frame Inclinable type
  • ‘H’ Frame Piller type
  • Cross Shaft Press.

Options: 

  • Geared drive
  • Ungeared drive
  • Pneumatic drive
  • Stoke length change
  • Dist. Bed to Ram change
  • Dist. Centre to gap change
  • Knock out system
  • Auto lubrication system
  • All Dimensions are in mm.
  • Power supply 400/440 volts, 3 Phase, 50 Cycle. Geared Machine : 1440 RPM/Ungeared Machine : 960 RPM
  • As day to day Improvements are contemplated for better performance of the machine. We reserve the rights to alter the specifications
  • without prior notice.
  • All the machines undergo a through check-up by our expert engineers before dispatch to ensure their smooth and trouble free operation. & also available tailor made Power Press

Specifications:

Model No.

RPP 31

RPP 51

RPP 102

RPP 203

RPP 303

RPP 504

RPP 804

RPP 1005

RPP 1506

RPP 2006

RPP 2506

Tonnage Cap.

3

5

10

20

30

50

80

100

150

13-165

250

Stroke Adjustment

2 - 25

6 - 25

6 - 50

13 - 75

13 - 75

13 - 100

13 - 114

13 - 127

13 - 152

375

13 - 165

Depth of Throat

75

100

125

175

187

200

275

320

350

520

400

Dist Bed to Ram

130

150

200

280

300

350

450

450

500

520

550

Length & Width of Bed

200 x 150

350 x 200

450 x 250

500 x 350

550 x 375

650 x 400

750 x 550

900 x 640

1000 x 700

1050 x 750

1100 x 800

Hole in Bed

50

65

75

89

102

127

127

190

200

215

230

Hole in Ram

20

25

25

32

38

50

50

50

63

63

63

Crank Shaft Diameter

38

51

60

76

83

95

114

127

152

165

165

Fly wheel Diameter

330

356

406

508

560

762

762

813

915

1118

1170

Stroke per Minute

85

80

70

45

40

35

30

30

30

30

30

H P Required

0.5

0.5

1

2

3

5

7.5

10

15

20

25

Weight Approx

150

300

525

1000

1300

2300

4000

5400

6500

8500

11000

Yes, I am Interested !

Hydraulic Single Cylinder Shearing Machine

Standard Features: 

  • Moving beam synchronized by differential cylinders.
  • Hardened rollers guide beam for constant blade gap.
  • Rank angle adjustable to suit thickness and material.
  • Blade gap adjustable with levers for clean cuts.
  • Sheets clamped hydraulically before cut starts.
  • Shearing-clampin forces adjustable to suit job.
  • Both blades premium HCHCr, four usable edges.
  • Cutting length and position adjustable for shorter job.
  • Beam returns on releasing foot switch for smaller cuts.
  • Cutting area illuminated for clear view of blades.
  • first two hold-downs spaced closer at both ends.
  • Squaring arm 1000mm at left with hardened lines.
  • Squaring arm 600mm at right helps distribute wear.
  • Front gauging with stops, scale on squaring arm.
  • Hardened rods, recessed table for easy sheet feeding.
  • Sheet supports 1000mm long help support long plates.
  • Ramp on rear slides out cut sheets outside shear area.
  • Back gauge moves away trapping of cut sheets.
  • Foot switch movable for operation from safe position.
  • Finger Safety guard with clear view of lighted cutting area.
  • Dependable global of hydraulics, electrical.
  • Efficient compact power pack with minimal piping.
  • Electrical neatly wired-labelled for trouble shooting.

Optional Accessories: 

  • Sheet front feeding system.
  • NC back gauge with ball screw.
  • Hydraulic rear sheet support.
  • Automatic control shearing.
  • Sheet rear stacking system.

Specifications:

Model

Shearing Length mm

Shear Thic. Rake Angle/(Min/Max)

Rake Angle

Rake Angle Range

Strokes/minute at Min & Max Rake Angle

Holddowns

Holding Force Kgs.

Power H.P.

Ovar all Diamensions in mm
( L x W x H )

Approx. Weight Kgs.

M.S.

S.S.

RHV325

2500

3.15/4

2/3

1°15'

0.5-2°

28-13

13

2500

5

3150 x 2000 x 2400

3800

RHV330

3000

3.15/4

2/3

1°15'

0.5-2°

24-9

16

2500

5

3500 x 2000 x 2400

440

RHV412

1250

4/6

3/4

1°37'

0.5-3°

33-17

5

4000

5

2000 x 2000 x 2400

2700

RHV415

1500

4/6

3/4

1°37'

0.5-3°

30-15

8

4500

5

2250 x 2000 x 2400

3200

RHV420

2000

4/6

3/4

1°37'

0.5-3°

28-13

11

6200

7.5

2750 x 2000 x 2400

3500

RHV425

2500

4/6

3/4

1°37'

0.5-3°

26-8

13

8000

7.5

3400 x 2350 x 2450

5200

RHV430

3000

4/6

3/4

1°37'

0.5-3°

24-6

16

10000

10

4000 x 2350 x 2450

6000

RHV440

4000

4/6

3/4

1°45'

0.5-3°

22-6

20

12000

10

4500 x 2350 x 2450

85000

RHV615

1500

6/8

4/6

1°45'

0.5-3°

24-8

9

6600

10

2250 x 2350 x 2500

4000

RHV620

2000

6/8

4/6

1°45'

0.5-3°

22-7

11

6500

10

2750 x 2350 x 2500

4300

RHV625

2500

6/8

4/6

1°45'

0.5-3°

28-8

14

8500

15

3400 x 2350 x 2500

6200

RHV630

3000

6/8

4/6

1°45'

0.5-3°

24-6

16

10800

15

4000 x 2350 x 2500

7000

RHV640

4000

6/8

4/6

0.5-3°

24-6

20

13600

20

5100 x 2700 x 2800

8400

RHV815

1500

8/10

6/8

0.5-3°

22-10

9

10500

15

2250 x 2600 x 2650

5000

RHV820

2000

8/10

6/8

0.5-3°

18-8

11

12500

15

2750 x 2600 x 2650

5500

RHV825

2500

8/10

6/8

0.5-3°

24-8

14

16300

20

3500 x 2600 x 2650

6800

RHV830

3000

8/10

6/8

0.5-3°

20-6

16

18500

20

4200 x 2600 x 2650

7700

RHV840

4000

8/10

6/8

0.5-3°

20-8

20

23000

25

5200 x 2900 x 2800

13500

RHV1015

1500

10/13

8/10

0.5-3°

20-10

9

10500

15

2250 x 2650 x 2700

5500

RHV1020

2000

10/13

8/10

0.5-3°

18-8

11

12600

15

2750 x 2650 x 2700

6000

RHV1025

2500

10/13

8/10

0.5-3°

24-8

14

17500

20

3600 x 2650 x 2700

8000

RHV1030

3000

10/13

8/10

0.5-3°

20-6

16

20000

20

4200 x 2650 x 2700

10500

RHV1040

4000

10/13

8/10

0.5-3°

18-6

20

25000

30

5200 x 2900 x 2900

15200

RHV1320

2000

13/16

10/13

1-3°

13-5

11

16500

20

2750 x 2650 x 2950

7000

RHV1325

2500

13/16

10/13

1-3°

15-10

13

32000

25

3600 x 2650 x 2950

9600

RHV1330

3000

13/16

10/13

1-3°

12-6

16

37000

25

4200 x 2650 x 2950

11800

RHV1340

4000

13/16

10/13

1-3°

10-4

20

22000

30

5200 x 3000 x 3050

17800

RHV1620

2000

16/20

13/16

1-3°

13-7

11

20000

25

2750 x 2950 x 3150

12000

RHV1625

2500

16/20

13/16

1-3°

15-8

13

40000

30

3600 x 2950 x 3150

12000

RHV1630

3000

16/20

13/16

1-3°

12-6

16

43500

30

4250 x 2950 x 3150

15300

RHV1640

4000

16/20

13/16

1-3°

10-4

20

30000

30

5200 x 3050 x 3500

21500

RHV2020

2000

20/25

16/20

1-3°

16-8

11

32000

40

2900 x 2950 x 3150

17000

RHV2025

2500

20/25

16/20

1-3°

15-8

13

48000

40

3600 x 2950 x 3150

18000

RHV2030

3000

20/25

16/20

1-3°

12-6

16

52000

40

4250 x 2950 x 3150

20000

RHV2040

4000

20/25

16/20

1-3°

10-4

20

30000

50

5200 x 3050 x 3500

24000

Yes, I am Interested !

Hydraulic Press 125 Ton

RT Power Press Hydraulic Press Brakes are designed and developed through years of experience in sheet metal working machinaries. RT Power Press Hydraulic Press Brakes are developed by keeping latest technology in mind. Both cylinders are mounted at back side of Press Brake are synchronized for parallesm between ram & table, by providing mechanical links connected with cylinder. The heavy duty steel construction frame is so designed to absorb heavy shocks of overload. All welding edges are properly machined for best weld joints. The electric control panel is fixed on side wall at conventional place for easy reach of operator. It includes push botton pendant and foot switch. Standard “V” block & “V” Punch and manually operated back guage system which is front operated are supplied as a standard accessories. Hydraulic components are of reputed make like Videkers, Rexroth, Dowty, Yuken, Polyhydron etc.

Capacities rated for M.S. (U.T.S. 45kg/mm2). Bending capacities stated are only representative and not binding. Allow extra capacity for material inconsistencies, bending conditions. Right to change specification, features without notice reserved. Compliance with safety requirements as per local regulations is responsibility of the user.

Standard Features: 

Electric motor, Control Panel with selection of INCH-ONCE-AUTO Mode of operation. Foot switch. Fine stroke adjustment rod with limit switches, Manual Lubrication, Manual Back Guage, Standard V Block Punch, Insruction Manual.

Options:

Goose Neck Punch & other tooling (drawing required), Electronic Stroke Counter, NC Operated Back Guage, Automatic Lubrication System.

  • All Dimensions are in mm.
  • Power supply 400/440 volts, 3 Phase, 50 Cycle.
  • As day to day Improvements are contemplated for better performance of the machine. We reserve the rights to alter the specifications without prior notice.
  • All the machines undergo a through check-up by our expert engineers before dispatch to ensure their smooth and trouble free operation.
  • Electricals are not under warranty.

 

Specifications:

Model

Tonnage

Bending Cap.(In M.S., UTS 45Kg/mm2)

Table Length

Table Width

Clear Pass

Ram Stroke

Open Height

Throat Depth

Speed Approch Pressing Return

Power H.P.

Over all Diamensions
(L x W x H)

Approx. Weight Kgs.

RHP215

20

1.6 x 1500

2 x 1250

1500

125

1250

100

250

100

35-9-35

2

1800 x 1500 x 2000

1500

RHP320

30

2 x 2000

3 x 1250

2000

125

1700

100

280

200

30-7-30

3

2300 x 1600 x 2000

2500

RHP425

40

2 x 2500

3 x 1500

2500

170

2000

100

280

200

40-8-40

3

2700 x 1850 x 2050

3000

RHP515

50

4 x 1500

5 x 1250

1500

170

1000

100

280

200

35-7-35

5

1800 x 1500 x 2000

2500

RHP520

50

3 x 2000

4 x 1500

2000

170

1500

100

280

200

35-7-35

5

2300 x 1900 x 2200

3400

RHP525

50

2.5 x 2500

3 x 2000

2500

170

2000

100

280

200

35-7-35

5

2850 x 1900 x 2200

3700

RHP625

65

3 x 2500

4 x 2000

2500

170

2000

150

330

200

30-5-30

5

2850 x 1950 x 2350

3900

RHP630

65

2.5 x 3000

3 x 2500

3000

170

2500

150

330

200

30-5-30

5

3350 x 1950 x 2350

4300

RHP825

80

4 x 2500

5 x 2000

2500

170

2000

150

350

200

38-6-45

7.5

2850 x 2100 x 2350

4500

RHP830

80

3 x 3000

4 x 2500

3000

170

2500

150

350

200

38-6-45

7.5

3350 x 2100 x 2350

5000

RHP1025

100

5 x 2500

6 x 2000

2500

170

2000

150

350

200

38-6-45

7.5

2900 x 2200 x 2350

5600

RHP1030

100

4 x 3000

5 x 2500

3000

170

2500

150

350

200

38-6-45

7.5

3400 x 2200 x 2350

6200

RHP1040

100

3 x 4000

4 x 3000

4000

170

3000

150

350

200

38-6-45

7.5

4250 x 2200 x 2350

7000

RHP1225

125

6 x 2500

8 x 2000

2500

220

2000

150

350

300

38-5-40

10

2750 x 2450 x 2600

6500

RHP1230

125

5 x 3000

6 x 2500

3000

220

2500

150

350

300

38-5-40

10

3400 x 2450 x 2600

7000

RHP1240

125

4 x 4000

5 x 3000

4000

220

3000

150

350

300

38-5-40

10

4150 x 2450 x 2650

8800

RHP1625

160

8 x 2500

10 x 2000

2500

220

2000

150

350

300

35-6-40

15

2750 x 2500 x 2600

8200

RHP1630

160

6 x 3000

8 x 2500

3000

220

2500

150

350

300

35-6-40

15

3400 x 2500 x 2600

8800

RHP1640

160

5 x 4000

6 x 3000

4000

220

3000

150

350

300

35-6-40

15

4200 x 2500 x 2700

9800

RHP2025

200

10 x 2500

12 x 2000

2500

220

2000

200

410

300

35-7-35

20

2850 x 2650 x 2700

8500

RHP2030

200

8 x 3000

10 x 2500

3000

220

2500

200

410

300

35-7-35

20

3450 x 2650 x 2700

9500

RHP2040

200

6 x 4000

8 x 3000

4000

220

3000

200

410

300

35-7-35

20

4200 x 2650 x 2800

10500

RHP2530

250

10 x 3000

12 x 2500

3000

300

2500

200

410

300

35-6-40

25

3350 x 2650 x 2800

12000

RHP2540

250

8 x 4000

10 x 3000

4000

300

3000

200

410

300

35-6-40

25

4350 x 2650 x 2800

13500

RHP3030

300

12 x 3000

15 x 2500

3000

300

2500

200

410

300

30-6-35

30

3450 x 2750 x 2800

12000

RHP3040

300

10 x 4000

12 x 3000

4000

300

3000

200

410

300

30-6-35

30

4250 x 2750 x 2900

15000

RHP4030

400

16 x 3000

20 x 2500

3000

300

2500

250

500

300

30-5-35

40

3350 x 2900 x 3000

17000

RHP4040

400

12 x 4000

16 x 3000

4000

300

3000

250

500

300

30-5-35

40

4300 x 2900 x 3000

18000

Yes, I am Interested !

Hydraulic Press 500 Ton

RT Power Press Hydraulic Press Brakes are designed and developed through years of experience in sheet metal working machinaries. RT Power Press Hydraulic Press Brakes are developed by keeping latest technology in mind. Both cylinders are mounted at back side of Press Brake are synchronized for parallesm between ram & table, by providing mechanical links connected with cylinder. The heavy duty steel construction frame is so designed to absorb heavy shocks of overload. All welding edges are properly machined for best weld joints. The electric control panel is fixed on side wall at conventional place for easy reach of operator. It includes push botton pendant and foot switch. Standard “V” block & “V” Punch and manually operated back guage system which is front operated are supplied as a standard accessories. Hydraulic components are of reputed make like Videkers, Rexroth, Dowty, Yuken, Polyhydron etc.

Capacities rated for M.S. (U.T.S. 45kg/mm2). Bending capacities stated are only representative and not binding. Allow extra capacity for material inconsistencies, bending conditions. Right to change specification, features without notice reserved. Compliance with safety requirements as per local regulations is responsibility of the user.

Standard Features: 

Electric motor, Control Panel with selection of INCH-ONCE-AUTO Mode of operation. Foot switch. Fine stroke adjustment rod with limit switches, Manual Lubrication, Manual Back Guage, Standard V Block Punch, Insruction Manual.

Options:

Goose Neck Punch & other tooling (drawing required), Electronic Stroke Counter, NC Operated Back Guage, Automatic Lubrication System.

  • All Dimensions are in mm.
  • Power supply 400/440 volts, 3 Phase, 50 Cycle.
  • As day to day Improvements are contemplated for better performance of the machine. We reserve the rights to alter the specifications without prior notice.
  • All the machines undergo a through check-up by our expert engineers before dispatch to ensure their smooth and trouble free operation.
  • Electricals are not under warranty.

 

Specifications:

Model

Tonnage

Bending Cap.(In M.S., UTS 45Kg/mm2)

Table Length

Table Width

Clear Pass

Ram Stroke

Open Height

Throat Depth

Speed Approch Pressing Return

Power H.P.

Over all Diamensions
(L x W x H)

Approx. Weight Kgs.

RHP215

20

1.6 x 1500

2 x 1250

1500

125

1250

100

250

100

35-9-35

2

1800 x 1500 x 2000

1500

RHP320

30

2 x 2000

3 x 1250

2000

125

1700

100

280

200

30-7-30

3

2300 x 1600 x 2000

2500

RHP425

40

2 x 2500

3 x 1500

2500

170

2000

100

280

200

40-8-40

3

2700 x 1850 x 2050

3000

RHP515

50

4 x 1500

5 x 1250

1500

170

1000

100

280

200

35-7-35

5

1800 x 1500 x 2000

2500

RHP520

50

3 x 2000

4 x 1500

2000

170

1500

100

280

200

35-7-35

5

2300 x 1900 x 2200

3400

RHP525

50

2.5 x 2500

3 x 2000

2500

170

2000

100

280

200

35-7-35

5

2850 x 1900 x 2200

3700

RHP625

65

3 x 2500

4 x 2000

2500

170

2000

150

330

200

30-5-30

5

2850 x 1950 x 2350

3900

RHP630

65

2.5 x 3000

3 x 2500

3000

170

2500

150

330

200

30-5-30

5

3350 x 1950 x 2350

4300

RHP825

80

4 x 2500

5 x 2000

2500

170

2000

150

350

200

38-6-45

7.5

2850 x 2100 x 2350

4500

RHP830

80

3 x 3000

4 x 2500

3000

170

2500

150

350

200

38-6-45

7.5

3350 x 2100 x 2350

5000

RHP1025

100

5 x 2500

6 x 2000

2500

170

2000

150

350

200

38-6-45

7.5

2900 x 2200 x 2350

5600

RHP1030

100

4 x 3000

5 x 2500

3000

170

2500

150

350

200

38-6-45

7.5

3400 x 2200 x 2350

6200

RHP1040

100

3 x 4000

4 x 3000

4000

170

3000

150

350

200

38-6-45

7.5

4250 x 2200 x 2350

7000

RHP1225

125

6 x 2500

8 x 2000

2500

220

2000

150

350

300

38-5-40

10

2750 x 2450 x 2600

6500

RHP1230

125

5 x 3000

6 x 2500

3000

220

2500

150

350

300

38-5-40

10

3400 x 2450 x 2600

7000

RHP1240

125

4 x 4000

5 x 3000

4000

220

3000

150

350

300

38-5-40

10

4150 x 2450 x 2650

8800

RHP1625

160

8 x 2500

10 x 2000

2500

220

2000

150

350

300

35-6-40

15

2750 x 2500 x 2600

8200

RHP1630

160

6 x 3000

8 x 2500

3000

220

2500

150

350

300

35-6-40

15

3400 x 2500 x 2600

8800

RHP1640

160

5 x 4000

6 x 3000

4000

220

3000

150

350

300

35-6-40

15

4200 x 2500 x 2700

9800

RHP2025

200

10 x 2500

12 x 2000

2500

220

2000

200

410

300

35-7-35

20

2850 x 2650 x 2700

8500

RHP2030

200

8 x 3000

10 x 2500

3000

220

2500

200

410

300

35-7-35

20

3450 x 2650 x 2700

9500

RHP2040

200

6 x 4000

8 x 3000

4000

220

3000

200

410

300

35-7-35

20

4200 x 2650 x 2800

10500

RHP2530

250

10 x 3000

12 x 2500

3000

300

2500

200

410

300

35-6-40

25

3350 x 2650 x 2800

12000

RHP2540

250

8 x 4000

10 x 3000

4000

300

3000

200

410

300

35-6-40

25

4350 x 2650 x 2800

13500

RHP3030

300

12 x 3000

15 x 2500

3000

300

2500

200

410

300

30-6-35

30

3450 x 2750 x 2800

12000

RHP3040

300

10 x 4000

12 x 3000

4000

300

3000

200

410

300

30-6-35

30

4250 x 2750 x 2900

15000

RHP4030

400

16 x 3000

20 x 2500

3000

300

2500

250

500

300

30-5-35

40

3350 x 2900 x 3000

17000

RHP4040

400

12 x 4000

16 x 3000

4000

300

3000

250

500

300

30-5-35

40

4300 x 2900 x 3000

18000

Yes, I am Interested !

BAILLING PRESS

FOR SCRAP PRESSING PROCESS

Yes, I am Interested !

Cut to Length Line

Hydraulic Coil Car

Hydraulic Decoiler Machine

Paper Mill Machine

Slitting Machine

Roll Forming

Our Products

Quick Enquiry

Get In Touch